Luidsprekers

 
8 gevonden, waarvan 8 getoond.
Art. Omschrijving prijs voorraad
aantal
E-MU PS 12
Actieve Subwoofers
E-MU













 Precision Subwoofer

PS12E-MU's PS12 Precision Subwoofer features a premium 12" driver and custom discrete 200 watt MOSFET amplifier in a compact, sealed cabinet design to deliver superior transient response and low distortion. From nuanced acoustic performances to extreme club mixes, the PS12 delivers linear frequency response down to 22Hz. Whether used in conjunction with E-MU's PM5 Precision Monitors or other speakers, the PS12 is perfect for both stereo and surround applications with professional features like balanced/unbalanced inputs and outputs; high-pass, low-pass and subsonic filters; variable level and phase controls; overload protection; and a footswitch input that allows effortless bypassing of the subwoofer and high-pass filter during mixdown.
PS12


 Technical Specifications

General

Type: front firing, acoustic suspension active reference subwoofer
Frequency Response: 22Hz~135Hz (±2.5dB), 30Hz - 100Hz (±1.5dB)
Maximum Sound Pressure Level, short term: =103dB SPL @1m @ 60Hz
Driver:
- Polymer-Laminated Cone with Butyl-rubber surround
- Long-throw with high temperature voice coil
- Size: 305mm (12")
Dimensions:
- Height: 385mm (15.1")
- Width: 362mm (14.2")
- Depth: 390mm (15.3")
Weight: 19.5kg (43lbs)
Power:
- Input Voltage: 100V-120V~50/60Hz Input Current: 2.5A
- Input Voltage: 220V-240V~50/60Hz Input Current: 1.25A
- Auto power-On/Standby (15-minute standby delay)
Fuse:
- 100-120V: 2.5A/250V
- 220-240V: 1.25A/250V

Connections:

(2) Balanced Neutrik® Combination XLR/TRS Inputs
(2) Unbalanced RCA Inputs
(2) Balanced XLR Satellite Outputs
(2) Unbalanced RCA Satellite Outputs
(1) 3-pin power connector
(1) Subwoofer/Hi-Pass Filter Bypass Footswitch Input(Foot Switch not included)

Crossover Network:

Sub-Sonic Rumble filter: 15Hz @ 12dB/octave
Low-Pass Filter(to subwoofer): Variable frequency Linkwitz-Riley 4th order (55Hz~135)
Hi-Pass Filter(to satellite outputs): Variable frequency Linkwitz-Riley 2nd order (40Hz~135Hz)
Input Impedance
- Balanced: 20KOhms
- Unbalanced: 100KOhms

Amplifier:

Type: custom discrete MOSFET
Power: 200W RMS into 4 ohms continuous
Signal-to-Noise Ratio, referred to full output: >102dB A-weighted
Distortion: THD <0.1%


 Retail Box Contents

E-MU® PS12 Precision Subwoofer
Power Cord
Owner's Manual
Warranty and Support Information



E-MU PS 12 € 499,00
Dap Audio - X-15BA
Dap-Audio













X-15BA
Active Sub/Bass Speaker 15"
• Lightweight switched mode power supply.
• Separate amplifiers for mid and 
high speakers.
• Active 2 way crossover network.
• User adjustable crossover frequency
60Hz-250Hz/24dB.Oct.
• Multiband limiter circuit for optimal tone
balance and sound pressure level.
• Loudness switch for enhanced low
frequency response.
• Groundloop switch.
• Extra low frequency balanced output.

DAP audio has set the new high quality sound standard with the X-series speakers. Now the whole X-series speaker range have also become active with the addition of the new light weight amplifier systems and switch mode power supply (SMPS).

The benefits are:

• Easy handling and setup. No power amplifiers needed.
• Build in light weight amplifier module of only 3.5 kg.
• Flexible use and expanding capabilities.
• Only slightly larger cabinets, compared with the passive versions.


The Active X-series Loudspeakers have the same high quality components as his passive brothers. The internal processing and the two amplifiers build in the 2-way speaker cabinets makes it also possible to get an optimal and smooth frequency response.

Features:

• Build in Class-D amplifier for the low speaker to get a very high efficiency, up to 90% 
• Build in Class-AB amplifier for the high driver to get an optimal sound quality.
• Multiband limiting for optimal sound quality at any level and optimal protection.
• User adjustable crossover frequency setting from 60 – 250 Hz.
• Build in subsonic filters for optimal speaker protection.
• Loudness switch for automatically extended low frequencies performance, especially in case of small events or for background music.
• Auxiliary output for use with amplifiers and passive speakers, or use with other kinds of active speaker systems.
• Phase switch at the subwoofers.
• Ground lift switch to eliminate hum in ground loop situations.



15" Active Vented PA Subwoofer 
Loudness Switch
Ground Lift Switch
Auxiliary XLR High Out
Built-in Subsonic Filter
Built-in Soft Limiters 
Woofer: ER-1576L V2
8 Ohm, 76 mm 
Voice Coil
Amplifier Output Power Low: 400 Watt RMS
Freq. Response (-3, -6 dB): 38 – 250 Hz 
Freq. Range (-10 dB): 32 – 300 Hz
Adjustable Crossover Freq: 60 – 250 Hz, 
24 dB/Oct
Sensitivity (Half Space): 103 dB / W / m
Max. SPL at 1m (Theoretical): 129 dB
Nominal Dispersion (HxV): 360° x 180°
Dimensions (LxWxH): 500 x 690 x 700 mm 
Net Weight: 39.5 kg


D3254 Dap Audio - X-15BA € 699,00
Sinn7 Nadir.10 Wit (Per stuk)
Sinn7
 













Nadir - that is the zenith's opposite root point, that is where the bass hits its lowest point. With the Nadir.10 Sinn7 presents the appropriate active subwoofer for the new high-end near-field monitor speakers Zenit.5 and Zenit.8. Juslike these speakers, the Sinn7 Nadir.10 is equipped with woofers made of a fiber glass composite material. Low pass and high pass filters, phase reversal and volume adjustment allow an individually optimised adjustment of the Nadir subwoofer. 111 dB acoustic pressure, 225 W max. capacity and a highly sophisticated bass refley provide for a bass playback par excellence in every studio.
  • Professional bass monitor speaker
  • High excursion glass aramid composite woofer
  • Rounded angles for reduced edge diffraction
  • Optimized bass-reflex channels
  • Variable low pass filter (36 Hz - 50 Hz)
  • Fixed 80 Hz high pass filter
  • Active limiter
  • Manual phase reversal
  • Volume adjustment
  • 100 watt RMS active subwoofer
  • Maximum capacity: 140 watt
  • Type: one-way / bass-reflex system
  • Acoustic pressure level: 88 dB
  • Speaker: 25.4 cm woofer
  • Frequency range: 40 Hz - 130 Hz
  • Connections: XLR, 6.3 mm jack and RCA (10 kohm, symmetric as well as asymmetric)
  • Dimensions: 398 x 355 x 380 mm
  • Weight: 18.6 kg (per speaker)
S0211 Sinn7 Nadir.10 Wit (Per stuk) € 284,00
Sinn7 Nadir.10 Zwart (Per stuk)
Sinn7
 













Nadir - that is the zenith's opposite root point, that is where the bass hits its lowest point. With the Nadir.10 Sinn7 presents the appropriate active subwoofer for the new high-end near-field monitor speakers Zenit.5 and Zenit.8. Juslike these speakers, the Sinn7 Nadir.10 is equipped with woofers made of a fiber glass composite material. Low pass and high pass filters, phase reversal and volume adjustment allow an individually optimised adjustment of the Nadir subwoofer. 111 dB acoustic pressure, 225 W max. capacity and a highly sophisticated bass refley provide for a bass playback par excellence in every studio.
  • Professional bass monitor speaker
  • High excursion glass aramid composite woofer
  • Rounded angles for reduced edge diffraction
  • Optimized bass-reflex channels
  • Variable low pass filter (36 Hz - 50 Hz)
  • Fixed 80 Hz high pass filter
  • Active limiter
  • Manual phase reversal
  • Volume adjustment
  • 100 watt RMS active subwoofer
  • Maximum capacity: 140 watt
  • Type: one-way / bass-reflex system
  • Acoustic pressure level: 88 dB
  • Speaker: 25.4 cm woofer
  • Frequency range: 40 Hz - 130 Hz
  • Connections: XLR, 6.3 mm jack and RCA (10 kohm, symmetric as well as asymmetric)
  • Dimensions: 398 x 355 x 380 mm
  • Weight: 18.6 kg (per speaker)

S0210 Sinn7 Nadir.10 Zwart (Per stuk) € 284,00
Dap Audio - X-15HLA
Dap-Audio













X-15HLA
Active Hornloaded Sub/Bass Speaker 15"
• Lightweight amplifier and power supply
• Fully 2 way active crossover inside 
• User variable crossover frequency from 
60 – 250 Hz, 24 dB/oct 
• Auxilary High Out for other active full range
speaker systems 
• Built-in Subsonic filter to prevent
amplifier power waste and protection of 
the speaker 
• Clip Limiter 
• Loudness switch for enhanced low
frequency response 
• Phase switch 
• Groundloop switch

DAP audio has set the new high quality sound standard with the X-series speakers. Now the whole X-series speaker range have also become active with the addition of the new light weight amplifier systems and switch mode power supply (SMPS).

The benefits are:

• Easy handling and setup. No power amplifiers needed.
• Build in light weight amplifier module of only 3.5 kg.
• Flexible use and expanding capabilities.
• Only slightly larger cabinets, compared with the passive versions.


The Active X-series Loudspeakers have the same high quality components as his passive brothers. The internal processing and the two amplifiers build in the 2-way speaker cabinets makes it also possible to get an optimal and smooth frequency response.

Features:

• Build in Class-D amplifier for the low speaker to get a very high efficiency, up to 90% 
• Build in Class-AB amplifier for the high driver to get an optimal sound quality.
• Multiband limiting for optimal sound quality at any level and optimal protection.
• User adjustable crossover frequency setting from 60 – 250 Hz.
• Build in subsonic filters for optimal speaker protection.
• Loudness switch for automatically extended low frequencies performance, especially in case of small events or for background music.
• Auxiliary output for use with amplifiers and passive speakers, or use with other kinds of active speaker systems.
• Phase switch at the subwoofers.
• Ground lift switch to eliminate hum in ground loop situations.



15" Active Horn Loaded PA Subwoofer 
Loudness Switch
Ground Lift Switch
Auxiliary XLR High Out
Built-in Subsonic Filter
Built-in Soft Limiters 
Woofer: ER-A1599L-6, 
Alu Basket
6 Ohm, 100 mm 
Voice Coil
Amplifier Output Power Low: 600 Watt RMS
Freq. Response (-3, -6 dB): 38 – 250 Hz 
Freq. Range (-10 dB): 32 – 300 Hz
Adjustable Crossover Freq: 60 – 250 Hz, 
24 dB/Oct
Sensitivity (Half Space): 106 dB / W / m
Max. SPL at 1m (Theoretical): 133.8 dB
Nominal Dispersion (HxV): 360° x 180°
Dimensions (LxWxH): 600 x 810 x 790 mm 
Net Weight: 70 kg

D3256 Dap Audio - X-15HLA € 1.049,00
Dap Audio - X-18BA
Dap-Audio











X-18BA
Active Sub/Bass Speaker 18"
• Lightweight amplifier and power supply 
• Fully 2 way active crossover inside
• User variable crossover frequency from 
60 – 250 Hz, 24 dB/oct 
• Auxilary High Out for other active full range
speaker systems 
• Built-in Subsonic filter to prevent amplifier
power waste and protection of the speaker 
• Clip Limiter
• Loudness switch for enhanced low
frequency response
• Phase switch 
• Groundloop switch

DAP audio has set the new high quality sound standard with the X-series speakers. Now the whole X-series speaker range have also become active with the addition of the new light weight amplifier systems and switch mode power supply (SMPS).

The benefits are:

• Easy handling and setup. No power amplifiers needed.
• Build in light weight amplifier module of only 3.5 kg.
• Flexible use and expanding capabilities.
• Only slightly larger cabinets, compared with the passive versions.


The Active X-series Loudspeakers have the same high quality components as his passive brothers. The internal processing and the two amplifiers build in the 2-way speaker cabinets makes it also possible to get an optimal and smooth frequency response.

Features:

• Build in Class-D amplifier for the low speaker to get a very high efficiency, up to 90% 
• Build in Class-AB amplifier for the high driver to get an optimal sound quality.
• Multiband limiting for optimal sound quality at any level and optimal protection.
• User adjustable crossover frequency setting from 60 – 250 Hz.
• Build in subsonic filters for optimal speaker protection.
• Loudness switch for automatically extended low frequencies performance, especially in case of small events or for background music.
• Auxiliary output for use with amplifiers and passive speakers, or use with other kinds of active speaker systems.
• Phase switch at the subwoofers.
• Ground lift switch to eliminate hum in ground loop situations.



18" Active Vented PA Subwoofer 
Loudness Switch
Ground Lift Switch
Auxiliary XLR High Out
Built-in Subsonic Filter
Built-in Soft Limiters 
Woofer: ER-1899L-6
6 Ohm, 100 mm 
Voice Coil
Amplifier Output Power Low: 600 Watt RMS
Freq. Response (-3, -6 dB): 35 – 250 Hz 
Freq. Range (-10 dB): 30 – 300 Hz
Adjustable Crossover Freq: 60 – 250 Hz, 
24 dB/Oct
Sensitivity (Half Space): 104 dB / W / m
Max. SPL at 1m (Theoretical): 131.8 dB
Nominal Dispersion (HxV): 360° x 180°
Dimensions (LxWxH): 600 x 690 x 750 mm 
Net Weight: 50,5 kg



D3255 Dap Audio - X-18BA € 859,00
Mackie HRS120 Subwoofer
Mackie













Studio Quality Active Subwoofer Technology.

If you're putting together a matched system, the HRS120 is designed to work in perfect harmony with our HR824, HR624 and HR626 Active Near Field Monitors. The THX-approved Mackie HRS120 is a 12" Active subwoofer ideal for applications where precise, low frequency reproduction, and flexible monitoring are a must. Designed for professional recording studios and film/video surround post-production facilities that require extremely accurate bass extension to 19Hz and below, the HRS120 is also an excellent choice for home theater surround sound installations.

BUILT-IN FR SERIES POWER AMPLIFIER
What better way to power the subwoofer than with one of our acclaimed FR Series "Fast Recovery" power amplifiers? Our FR design uses low negative feedback, yet allows the amplifier to maintain low distortion and stability, even when driven into clipping. We built a beefy 400-watt FR amplifier for the HRS120, capable of extracting the maximum "thumpage" from the premium-quality 12" LF driver, without driving it into meltdown. Which brings us to the speakers...

THE TRANSDUCERS 
The HRS120 subwoofer features a bottom-firing 12" die-cast frame woofer and a 12" passive radiator in the front. The unique passive radiator design provides a smooth response down to 19Hz—an astounding accomplishment for a cabinet of this size! And since the radiator is adding to the output at the lowest frequencies, very little distortion is generated because the woofer stays well within its excursion limits.

VERSATILITY 
The HRS120 subwoofer features a bottom-firing 12" premium, die-cast frame woofer and a 12" passive radiator mounted in the front. This unique design provides smooth response all the way down to 19Hz—an astounding accomplishment for a cabinet this size! Since the passive radiator's output is effectively coupled to the room's air mass, the woofer stays well within its excursion limits, producing distortion-free deep, rich bass.

VALUE OVER PASSIVE SYTEMS?
Passive loudspeakers require external power amps, crossovers, and equalizers, costing you extra money—and unless you're an electronics engineer, you just might be over- or under-powering your system, which could lead to expensive repairs! Since all necessary processing and amplification is included within its enclosure, the HRS120 stands out as an exceptional value. You can rest assured that all components are perfectly matched for performance and reliability—and thanks to our advanced manufacturing techniques, Mackie HRS120s deliver "high-end" performance without the high-end price tag. Just bring your favorite CD* to a nearby dealer and compare them side-by-side with the competition. You'll hear the difference right away.

* Please, no iPods. We love 'em too, but compressed music files aren't going to give you an accurate read on the bottom-end these monitors can deliver.



FEATURES:
•
High-resolution Active subwoofer system designed for studio applications
•
Extended high-resolution output down to 19Hz
•
12” (305mm), extended LF transducer with 4-inch voice coil
•
Acoustically-coupled 12” passive radiator
•
Built-in 400 watt FR Series low distortion, servo feedback amplifier
•
Perfect for use with HR824, HR624 and HR626 Active Near Field Monitors
•
Adjustable high pass output for use with full-range monitors
•
Adjustable 60 to 110Hz crossover point
•
110Hz elliptical filter for Dolby® AC-3
•
0dB / +10dB Output Level switch for AC-3 and THX® Dot1 recording
•
Crossover Defeat switch for THX®
•
0 degrees/180degrees Polarity switch
•
Rotary Input Sensitivity control
•
Balanced XLR/unbalanced RCA inputs and outputs
•
Slave input and master output (XLR/RCA) for linking multiple slaves
•
1/4" phone jack for sub mute and satellite full range
•
1/4" phone jack for remote mute indicator
•
Power and Sub Bypass / Mute LEDs

After years of working with monitors in various pro studios... I have not heard a monitor that exceeds the accuracy and richness of the [HR Series].

Rusty Cutchin
Home Recording Magazine

39046 Mackie HRS120 Subwoofer € 1.499,00
KRK 10 S
KRK













The new Rokit Powered series of close-field monitors wouldn’t be complete without a compatible low-end companion. The RP 10S sub-woofer was designed to deliver an articulate linear bass extension specifically tailored to fit the Rokit Powered monitor’s spectral balance. The RP10S features a level control, phase switch and variable filter control as well as the full compliment of input options offered on the Rokit Powered Monitors. We’ve even added a removable grill.

Drivers: 
Woofer:10\" High Excursion Glass Aramid Composite Woofer 

Input: 
XLR (3-pin), RCA & 1/4\" TRS - 10k Ohm
Balanced / Unbalanced 

Amplification: 
Peak Power : 225 Watts
Variable Low Pass Filter + Phase
Fixed 80Hz High Pass Filter
Active Limiter 

Frequency Response: 
36Hz - 150Hz to 

Video Shielding: 
Yes 

Dimensions:
(H x W x D) 15\" H x 14\" W x 15 11/16\"D
38.2cm H x 35.5cm W x 39.8cm D 

Shipping Weight: 
42 lbs (19 Kg)

 
10S KRK 10 S € 399,00
8 gevonden, waarvan 8 getoond.
(Alle prijzen zijn incl. 19% BTW.)