Elementen & Naalden

 
20 gevonden, waarvan 20 getoond.
Art. Omschrijving prijs voorraad
aantal
Twin Cartridges
Ortofon














The Pro-S retains the overall sonic properties of the Pro Silver, but provides a wider stylus for low wear as well as durability under demanding conditions.  No matter what the application, the Pro-S provides remarkable versatility for virtually any setting.


Output voltage at 1000Hz, 5cm/sec.
5 mV
Channel balance at 1kHz
2 dB
Channel separation at 1kHz
20 dB
Channel separation at 15 kHz
15 dB
Frequency range at -3dB
20-20.000 Hz
Frequency response
20-18.000 Hz +/- 2 dB
Tracking ability at 315 Hz at recommmende tracking force
70 μm
Compliance, dynamic lateral
7 μm/m N
Stylus type
Spherical
Stylus tip radius
R 26 μm
Tracking force range
3,0-5,0 g (30-50 mN)
Tracking force recommended
4,0 g (40 mN)
Tracking angle
20°
Internal impedance, DC resistance
750 Ohm
Internal inductance
450 mH
Recommended load resistance
47 kOhm
Recommended load capacitance
200-600 pF
Cartridge weight
18,5 g
Replacement stylus unit
Pro S
O221672 Ortofon Concorde Pro S Twin Set € 177,00
Stanton

The new 505.V3 is the best budget-priced scratching cartridge available today. The super sturdy stylus has been coupled with the most pumped-up output for the deepest bottom and in-your-face sound.

Available in the following versions:

Single
A single cartridge inside a blister pack.

Twin Pack
Two cartridges inside a blister pack.

Twin Pack H4S
Two cartridges conveniently pre-mounted on Stanton H4S silver headshells.

Perfect for:

  • Hip-hop / Scratch DJs
  • Consumers
  • Record shops
  • Beginner DJs
  • Affordable cartridge ideal for scratching
  • 2-coil spherical design with high output and bass response
  • New industrial design

THE NEW STANTON 505 V3 STYLUS ALSO FITS THE OLD STANTON 505SK II CARTRIDGE. THE OLD D-5100 SK II DP STYLI ARE NOW REPLACED BY THE NEW N-505 STYLUS.

Description Measurement
Frequency Response 20 to 17 kHz
Output @ 1kHz: 6.0mV
Channel Separation @ 1 kHz: 27dB
Channel Balance @ 1 kHz: within 2 dB
Tracking Force: 2 to 5 grams
Stylus Tip: Spherical .7 mil Super High Polish
DC Resistance: 535 ohms
Inductance: 400 mH
Cartridge Weight: 5.5 grams
Tracking Ability: 80µ @ 3 grams
Recommended Load: 47k ohms and 275 pF
Replacement Stylus: N 505

Stanton 505.V3 H4 - Twin € 99,00
Stanton

The 500.V3 is an updated version of the classic Stanton 500AL. With more years spent on the decks than any other cartridge in the world, the 500 series has earned a reputation as a standard. The 500.V3 represents a perfect balance between economy, reliability, ruggedness and optimum performance.

Available in the following versions:

Single
A single cartridge inside a blister pack.

Twin Pack
Two cartridges inside a blister pack.

Perfect for:

  • Hip-Hop / Scratch and Club DJs
  • Consumers
  • Record shops
  • Beginner DJs
  • Industry-standard spherical cartridge ideal for almost any application
  • Rugged and reliable at a great price
  • New industrial design
  • Improved skip resistance

THE NEW STANTON 500 V3 STYLUS ALSO FITS THE OLD STANTON 505SK II CARTRIDGE. THE OLD D-D-5100 AL II DP STYLI ARE NOW REPLACED BY THE NEW N-500 STYLUS.

Description Measurement
Frequency Response 20 to 17 kHz
Output @ 1kHz: 4.6mV
Channel Separation @ 1 kHz: 28dB
Channel Balance @ 1 kHz: within 2 dB
Tracking Force: 2 to 5 grams
Stylus Tip: Spherical .7 mil Special High Polish
DC Resistance: 535 ohms
Inductance: 400 mH
Cartridge Weight: 5.5 grams
Tracking Ability: 80µ @ 3 grams
Recommended Load: 47k ohms and 275 pF
Replacement Stylus: N 500

Stanton 500.V3 Twin € 69,00
Ortofon














The Pro Series of cartridges provides a great balance of sound quality with tracking ability, for virtually any style of music. With flat, transparent sound across the spectrum and excellent handling ability, the Pro Series represents one of the longest running values in DJ cartridges.

Output voltage at 1000Hz, 5cm/sec.
5 mV
Channel balance at 1kHz
1,5 dB
Channel separation at 1kHz
20 dB
Channel separation at 15 kHz
15 dB
Frequency range at -3dB
20-20.000 Hz
Frequency response
20-20.000 Hz 3dB/-2dB
Tracking ability at 315 Hz at recommmende tracking force
70 μm
Compliance, dynamic lateral
7 μm/m N
Stylus type
Spherical
Stylus tip radius
R 18 μm
Tracking force range
3,0-5,0 g (30-50 mN)
Tracking force recommended
4,0 g (40 mN)
Tracking angle
20°
Internal impedance, DC resistance
750 Ohm
Internal inductance
450 mH
Recommended load resistance
47 kOhm
Recommended load capacitance
200-600 pF
Cartridge weight
18,5 g
Replacement stylus unit
Pro
O221671 Ortofon Concorde Pro Twin Set € 193,00
Ortofon
 

  • Output voltage at 1000 Hz, 5cm/sec. 6 mV
  • Channel balance at 1 kHz 2 dB
  • Channel separation at 1 kHz 23 dB
  • Channel separation at 15 kHz 15 dB
  • Frequency range at - 3dB 20-22.000 Hz
  • Frequency response 20-20.000 Hz ± 2 dB
  • Tracking ability at 315Hz at recommended tracking force 80 µm
  • Compliance, dynamic, lateral 9 µm/mN
  • Stylus type Special elliptical
  • Stylus tip radius r/R 13/25 µm
  • Tracking force range 2,0-4,0 g (20-40 mN)
  • Tracking force, recommended 3,0 g (30 mN)
  • Tracking angle 20°
  • Internal impedance, DC resistance 750 Ohm
  • Internal inductance 450 mH
  • Recommended load resistance 47 kOhm
  • Recommended load capacitance 200-600 pF
  • Cartridge colour, White/White
  • Cartridge weight 18,5 g
  • Replacement stylus unit Arkiv

O221666 Ortofon Concorde Arkiv Twin Set € 214,00
Stanton

The new 505.V3 is the best budget-priced scratching cartridge available today. The super sturdy stylus has been coupled with the most pumped-up output for the deepest bottom and in-your-face sound.

Available in the following versions:

Single
A single cartridge inside a blister pack.

Twin Pack
Two cartridges inside a blister pack.

Twin Pack H4S
Two cartridges conveniently pre-mounted on Stanton H4S silver headshells.

Perfect for:

  • Hip-hop / Scratch DJs
  • Consumers
  • Record shops
  • Beginner DJs
  • Affordable cartridge ideal for scratching
  • 2-coil spherical design with high output and bass response
  • New industrial design

THE NEW STANTON 505 V3 STYLUS ALSO FITS THE OLD STANTON 505SK II CARTRIDGE. THE OLD D-5100 SK II DP STYLI ARE NOW REPLACED BY THE NEW N-505 STYLUS.

Description Measurement
Frequency Response 20 to 17 kHz
Output @ 1kHz: 6.0mV
Channel Separation @ 1 kHz: 27dB
Channel Balance @ 1 kHz: within 2 dB
Tracking Force: 2 to 5 grams
Stylus Tip: Spherical .7 mil Super High Polish
DC Resistance: 535 ohms
Inductance: 400 mH
Cartridge Weight: 5.5 grams
Tracking Ability: 80µ @ 3 grams
Recommended Load: 47k ohms and 275 pF
Replacement Stylus: N 505

Stanton 505.V3 Twin € 69,00
Stanton
OVERVIEW
Special double pack, pre-mounted on Stanton headshells for easy setup. Stanton has redesigned their entire line of cartridges, giving them a new look and improving performance with greater tracking ability and less record wear across the entire line. The 520 is a solid, everyday use cartridge suitable for all dj situations. This has the best specifications of the 500 series, improving on the classic 500 AL platform with better skip resistance, output (much louder) and sound quality. Like all of Stanton's workhorse 500 series cartridges, the 520 is also very durable and should last quite a long time under normal circumstances. The low price also boosts your value here.

K E Y  F E A T U R E S

- double pack pre-mounted on headhsells
- all-purpose dj cartridge
- rugged design
- standard 1/2" mount
- spherical stylus
- 6.0mV output
- 2.0-5.0g tracking force
- 20-17,000Hz frequency response
- 1 year warranty
I N C L U D E S

- mounting hardware
- headshell weight



 
Stanton 520.V3 H4 - Twin € 99,00
Stanton

Developed for ultimate clarity of sound Groovemaster V3 features an elliptical stylus design.

  • Professional integrated club cartridge
  • Elliptical stylus for enhanced groove tracing
  • 4-coil pickup increases stereo imaging while providing high output
  • New industrial design

    The Groovemaster.V3 is Stanton's high-end club integrated headshell cartridge. Equipped with an elliptical stylus, the Groovemaster.V3 delivers clean transcription of the record groove while the 4-coil pickup ensures sound quality on the level of an audiophile cartridge. The Groovemaster.V3 is the sure choice for the discriminating club DJ and producer. 

    Available in the following version:

    MP4
    The MP4 package includes 2 matched cartridges, mounted on tone-arm like devices, inside a small and practical road-worthy clear "flight-case". 

    Perfect for: 
  • Club DJs
  • Producers / Remixers
  • Night clubs

    Stanton Groovemaster V3 MP4 Description Measurement:
  • Frequency Response: 20 to 20 kHz 
  • Output @ 1kHz: 7.0mV 
  • Channel Separation @ 1 kHz: 30dB 
  • Channel Balance @ 1 kHz: within 2dB 
  • Tracking Force: 2 to 5 grams 
  • Stylus Tip: .7 mil Ellipitical
  • Special High Polish 
  • DC Resistance: 830 ohms nom. 
  • Inductance: 810 mH 
  • Cartridge Weight: 18 g 
  • Tracking Ability: 90µ @ 3 grams 
  • Recommended Load: 47k ohms and 275 pF 
  • Replacement Stylus: G3
  • MP4
    The MP4 package includes 2 matched cartridges, mounted on tone-arm like devices, inside a small and practical road-worthy clear "flight-case". 
 
Stanton Groovemaster.V3 MP4 € 219,00
Stanton

The perfect tool for the club DJ with a spherical stylus to enhance tracking while minimizing cue burn.

  • High-output cartridge perfect for club / scratch applications
  • 4-coil pickup design increases stereo imaging
  • Spherical stylus good for low cue burn
  • New industrial design 

    With very high output and little cue burn, the Trackmaster.V3 is perfect for any club / scratch situation. The Trackmaster.V3 integrated design eliminates the need for mounting the cartridge on a headshell. 

    Available in the following versions:

    MP4
    The MP4 package includes 2 matched cartridges, mounted on tone-arm like devices, inside a small and practical road-worthy clear "flight-case". 

    Perfect for:
  • Hip-hop / Scratch DJs
  • Club DJs

    Stanton Trackmaster V3 Description Measurement: 
    Frequency Response: 20 to 20 kHz 
    Output @ 1kHz: 7.0mV 
    Channel Separation @ 1 kHz: 30dB 
    Channel Balance @ 1 kHz: within 2dB 
    Tracking Force: 2 to 5 grams 
    Stylus Tip: .7 mil Ellipitical
    Super High Polish 
    DC Resistance: 830 ohms nom. 
    Inductance: 810 mH nom. 
    Cartridge Weight: 18 g 
    Tracking Ability: 90µ @ 3 grams 
    Recommended Load: 47k ohms and 275 pF 
    Replacement Stylus: T3
  • MP4
    The MP4 package includes 2 matched cartridges, mounted on tone-arm like devices, inside a small and practical road-worthy clear "flight-case".
     
 
Stanton Trackmaster.V3 MP4 € 189,00
Stanton
The Skratchmaster.V3 is Stanton's first headshell mountable version of the master series body. This provides the great stereo imaging of the master series cartridges and the ability to re-align the cartridge on the headshell for improved tracking response.

Available in the following versions:

Single
A single cartridge inside a plastic carry case. The Import version includes 1 spare stylus.

MP4
The MP4 package includes 2 matched cartridges, mounted on tone-arm like devices, inside a small and practical road-worthy clear "flight-case". The "import" MP4 version also includes 2 spare styli.

Perfect for:

  • Hip-hop / Scratch DJs
  • Club DJs
  • Consumers
  • Record shops
  • Beginner DJ
  • Only headshell mount version of the master series
  • Ideal cartridge in master series for scratching
  • New industrial design
Description Measurement
Frequency Response 20 to 18 kHz
Output @ 1kHz: 6.5mV
Channel Separation @ 1 kHz: 28dB
Channel Balance @ 1 kHz: 1.5 dB
Tracking Force: 2 to 5 grams
Stylus Tip: 0.7 mil Spherical
DC Resistance: 830 ohms nom.
Inductance: 810 mH nom.
Cartridge Weight: 6.3 g
Recommended Load: 47k ohms and 275 pF
Replacement Stylus: T3

 
Stanton Skratchmaster.V3 MP4 € 149,00
Ortofon













The DJ series has been known to many as the "jack of all trades," with improved tracking, alongside of accurate sound reproduction.  Featuring a low wear stylus design, the DJ provides excellent groove handling, even with less weight applied.  The DJ series of cartridges are great for any style of music, and has been a favored choice of DJs around the world.


Output voltage at 1000Hz, 5cm/sec.
6 mV
Channel balance at 1kHz
2 dB
Channel separation at 1kHz
23 dB
Channel separation at 15 kHz
15 dB
Frequency range at -3dB
20-20.000 Hz
Frequency response
20-18.000 Hz 3dB/-2 dB
Tracking ability at 315 Hz at recommmende tracking force
80 μm
Compliance, dynamic lateral
9 μm/m N
Stylus type
Spherical
Stylus tip radius
R 18 μm
Tracking force range
2,0-4,0 g (20-40 mN)
Tracking force recommended
3,0 g (30 mN)
Tracking angle
20°
Internal impedance, DC resistance
750 Ohm
Internal inductance
450 mH
Recommended load resistance
47 kOhm
Recommended load capacitance
200-600 pF
Cartridge weight
18,5 g
Replacement stylus unit
DJ S
O221668 Ortofon Concorde Dj S Twin Set € 217,00
Stanton
 The 890.FS is the first cartridge to be shipped with 2 types of styli and is designed for use with FinalScratch. The 2 spherical styli are designed for scratching and general playback. The 2 elliptical styli are designed for hi-quality playback for recording of records into the FinalScratch system or any other application where sound quality is critical. The 890.FS also includes a stylus mountable dust brush which sweeps dusts off of the groove of the record during playback and recording.

Available in the following version:

MP4
The MP4 package includes 2 matched cartridges, mounted on tone-arm like devices, inside a small and practical road-worthy clear "flight-case".

Perfect for:

  • Digital DJs
  • Hip-hop / Scratch DJs
  • Club DJs
  • Record Archives
  • Includes two types of styli for recording and playback applications
  • Designed for use with FinalScratch
  • Includes stylus mountable dust brush
  • New industrial design

Designed expressly for use with the Final Scratch System, Stanton has launched the 890FS DJ cartridge based on the top-of-the-line Stanton 890SA. The 890FS differs in that it's the first cartridge to be shipped with two different types of styli--spherical and elliptical. This makes it easy for DJs to switch between optimum sound quality for recording into Final Scratch, or optimum handling when mixing and scratching. The 890FS is further distinguished by its inclusion of a stylus-mountable brush which continually cleans dust out of the record's grooves during recording and playback.

" With the popularity of Final Scratch, DJs were looking for a cartridge that would provide both enhanced audio quality for recording and reliable performance during scratching," said Gerard Cohen, president of the Stanton Group. "So with the 890FS, we've really given DJs two cartridges in one. It's the best of both worlds."

The 890FS MP4 is the first cartridge to be shipped with 2 types of styli. The 2 spherical SA styli are designed for scratching and general playback. The 2 elliptical RM styli are designed for hi-quality playback to record music from vinyl into the Final Scratch system or any other application where sound quality is critical. The 890FS also includes a stylus mountable brush which sweeps dust off the record grooves during playback and recording.

Includes:

  • 2 Headshell mounted 890 cartridges
  • 2 D-89 SA spherical styli
  • 2 D-89 RM elliptical styli
  • 2 Headshell weights
  • 1 Stylus mountable brush
 
Stanton 890FS MP4 € 169,00
Ortofon













Despite its sleek white styling, the Elektro isn't just another pretty face.  Also featuring a reinforced rubber suspension, the Elektro is the perfect hybrid needle for the artist who both mixes and scratches.  Enhanced tracking ability and excellent sound quality combine to form a unique balance of form and functionality.  With bold, round sound, the Elektro brings your music to life, whether you're in the club or the studio.


Output voltage at 1000Hz, 5cm/sec.
7.5 mV
Channel balance at 1kHz
1,5 dB
Channel separation at 1kHz
25 dB
Channel separation at 15 kHz
15 dB
Frequency range at -3dB
20-22.000 Hz
Frequency response
20-15.000 Hz 3dB/-2dB
Tracking ability at 315 Hz at recommmende tracking force
80 μm
Compliance, dynamic lateral
6 μm/m N
Stylus type
Spherical
Stylus tip radius
R 18 μm
Tracking force range
3,0-5,0 g (30-50 mN)
Tracking force recommended
4,0 g (40 mN)
Tracking angle
20°
Internal impedance, DC resistance
750 Ohm
Internal inductance
450 mH
Recommended load resistance
47 kOhm
Recommended load capacitance
200-600 pF
Cartridge weight
18,5 g
Replacement stylus unit
Elektro
O221669 Ortofon Concorde Elektro Twin Set € 226,00
Stanton
The legendary 680.V3 cartridge is regarded as one of the best cartridges on the planet for mixing, club use, and scratching. The wide-band frequency response will give you high energy record playback and that extra punch you need to quake the dance floor whether playing dance or hip-hop. The 680.V3`s suspension is designed to be very stable for those less then perfect club setups. The suspension is so robust that the 680.V3 functions just as good as a scratch needle as it does as a club needle. 
  • Best cartridge for scratching
  • Extremely good low end response for club environments
  • Very forgiving suspension design
  • New industrial design

MP4

The MP4 package includes 2 matched cartridges, mounted on tone-arm like devices, inside a small and practical road-worthy clear `flight-case`.

Perfect for:

  • Hip-hop / Scratch DJs
  • Club DJs

Specs

  • Stylus Type: Spherical .7 mil Super High Polish
  • Tracking Force: 2 to 5 grams
  • Frequency Response: 20Hz to 18kHz
  • Nominal Output: 7.0mV
  • Channel Balance: within 2dB
  • Channel Separation: 30dB
  • DC Resistance: 1300 ohms nom.
  • Tracking Ability: 80µ @ 3 grams
  • Recommended Load: 47k ohms and 275 pF
  • Inductance: 930 mh nom.
  • Cartridge Weight: 6.3 grams
  • Replacement Stylus: N 680
 
Stanton 680.V3 MP4 € 149,00
Ortofon














Co-developed by one of the most legendary DJs of all time, the Ortofon Q.Bert provides unsurpassed handling, high output voltage, and low wear characteristics that literally put it in a class of its own. Turntablists and mix DJs alike will appreciate the strong output of this cartridge, coupled with unrivaled tracking ability and sonic characteristics.  The Q.Bert features a more subdued high end, which helps to minimize surface noise from worn vinyl, and an accentuated mid-range to help bring scratching to the front of the sound stage.


Output voltage at 1000Hz, 5cm/sec.
11 mV
Channel balance at 1kHz
1,5 dB
Channel separation at 1kHz
22 dB
Channel separation at 15 kHz
-
Frequency range at -3dB
20-18.000 Hz
Frequency response
20-18.000 Hz -3 dB
Tracking ability at 315 Hz at recommmende tracking force
90 μm
Compliance, dynamic lateral
12 μm/m N
Stylus type
Spherical
Stylus tip radius
R 18 μm
Tracking force range
3,0 g (30 mN)
Tracking force recommended
4,0 g (30 mN)
Tracking angle
20°
Internal impedance, DC resistance
1.680 Ohm
Internal inductance
920 mH
Recommended load resistance
47 kOhm
Recommended load capacitance
200-400 pF
Cartridge weight
18,5 g
Replacement stylus unit
Q.Bert
O221673 Ortofon Concorde Q Bert Twin Set € 243,00
Stanton
 Created expressly for the turntablist, featuring tight suspension for unmatched tracking force.
  • Two cartridges inside a blister pack
  • Best cartridge in the 500 series for scratching
  • Tight suspension performs at any tracking weight
  • New industrial design

Stanton 520.V3 Twin Turntablist Cartridge - Twin Pack
Designed with the most demanding tonearm cueing in mind, the 520.V3 Twin Turntablist Cartridge offers the tightest suspension in the 500 family of Stanton turntable products. The results: this cartridge can take the most demanding loads and deliver on point tracking during backspinning and scratching.

 
  • Frequency Response: 20 to 17 kHz
  • Output @ 1kHz: 6.0mV
  • Channel Separation @ 1 kHz: 27dB
  • Channel Balance @ 1 kHz: within 2 dB
  • Tracking Force: 2 to 5 grams
  • Stylus Tip: Spherical .7 mil Special High Polish
  • DC Resistance: 535 ohms
  • Inductance: 400 mH
  • Cartridge Weight: 5.5 grams
  • Tracking Ability: 80æ @ 3 grams
  • Recommended Load: 47k ohms and 275 pF
  • Replacement Stylus: N 520
Stanton 520.V3 Twin € 79,00
Ortofon













Designed to commemorate the release of the limited edition Technics SL-1200LTD and SL-1200GLD, the Concorde Gold was made to compliment the attractive stylings of these limited edition turntables and to provide the best possible sound quality available in a DJ cartridge. 

Available only with an elliptical stylus, the Concorde Gold is for DJs who will settle for nothing but the very best.



Output voltage at 1000Hz, 5cm/sec.
6 mV
Channel balance at 1kHz
1,5 dB
Channel separation at 1kHz
23 dB
Channel separation at 15 kHz
15 dB
Frequency range at -3dB
20-22.000 Hz
Frequency response
20-20.000 Hz +/- 2dB
Tracking ability at 315 Hz at recommended tracking force
80 μm
Compliance, dynamic lateral
7 μm/m N
Stylus type
Special Elliptical
Stylus tip radius
r/R 13/25 μm
Tracking force range
2,0-5,0 g (20-50 mN)
Tracking force recommended
3,0 g (30 mN)
Tracking angle
20°
Internal impedance, DC resistance
750 Ohm
Internal inductance
450 mH
Recommended load resistance
47 kOhm
Recommended load capacitance
200-600 pF
Cartridge weight
18,5 g
Replacement stylus unit
Gold
O221665 Ortofon Concorde Gold Twin Set € 344,00
Ortofon













Following in the footsteps of the legendary Night Club series, the re-engineered Night Club MKII boasts numerous sonic improvements in both club and studio settings.  With a new cartridge body, the Night Club MKII offers increased output voltage for powerful, energetic sound and enhanced performance from integrated phono preamps such as the ones found in DJ mixers).  The redesigned elliptical stylus provides well-balanced high frequency response and ample low end reproduction.  The Night Club MKII marks a new generation of club cartridges, designed to surpass the gold standard set by the original Night Club cartridge.


Output voltage at 1000Hz, 5cm/sec.
8 mV
Channel balance at 1kHz
1,5 dB
Channel separation at 1kHz
23 dB
Channel separation at 15 kHz
15 dB
Frequency range at -3dB
20-22.000 Hz
Frequency response
20-20.000 Hz +/- 1,5 dB
Tracking ability at 315 Hz at recommmende tracking force
80 μm
Compliance, dynamic lateral
7 μm/m N
Stylus type
Special Elliptical
Stylus tip radius
r/R 13/25 μm
Tracking force range
2,0-5,0 g (20-50 mN)
Tracking force recommended
3,0 g (30 mN)
Tracking angle
20°
Internal impedance, DC resistance
1.000 Ohm
Internal inductance
580 mH
Recommended load resistance
47 kOhm
Recommended load capacitance
200-600 pF
Cartridge weight
18,5 g
Replacement stylus unit
Nightclub E MKII
O221670 Ortofon Concorde Nightclub MK II Twin Set € 299,00
Ortofon













The newest cartridge from Ortofon, the DigiTrack responds to the next generation of turntable DJs who make extensive use of timecoded vinyl applications, such as Serato (TM) and FinalScratch (TM).  With DigiTrack's low wear design and tailored frequency response increase the lifespan of timecoded vinyl records, and provides high quality sound reproduction for playing conventional vinyl records as well.   DigiTrack also features excellent groove-handling capabilities for scratch and mix performance, as well as increased output voltage for improved TCV performance and better sound quality from your mixer's phono preamps.

Output voltage at 1000Hz, 5cm/sec.
8 mV
Channel balance at 1kHz
1,5 dB
Channel separation at 1kHz
22 dB
Channel separation at 15 kHz
15 dB
Frequency range at -3dB
20-20.000 Hz
Frequency response
20-18.000 Hz -3dB/-2 dB
Tracking ability at 315 Hz at recommmende tracking force
90 μm
Compliance, dynamic lateral
12 μm/m N
Stylus type
Spherical
Stylus tip radius
--
Tracking force range
2,0-4,0 g (20-40 mN)
Tracking force recommended
3,0 g (30 mN)
Tracking angle
-
Internal impedance, DC resistance
-
Internal inductance
-
Recommended load resistance
-
Recommended load capacitance
-
Cartridge weight
18,5 g
Replacement stylus unit
Digitrak
O221667 Ortofon Concorde DigiTrack Twin Set € 255,00
Ortofon















For DJs that require increased tracking ability, the Scratch is up to the task.  Featuring a reinforced rubber suspension, DJs need not worry about compromising sound quality and stylus life when working with higher tracking forces.  With solid bass reproduction and extended highs, the Scratch is great for any style, providing energetic, in-your-face sound.


Output voltage at 1000Hz, 5cm/sec.
7 mV
Channel balance at 1kHz
1,5 dB
Channel separation at 1kHz
25 dB
Channel separation at 15 kHz
15 dB
Frequency range at -3dB
20-20.000 Hz
Frequency response
20-15.000 Hz 3dB/-2dB
Tracking ability at 315 Hz at recommmende tracking force
80 μm
Compliance, dynamic lateral
6 μm/m N
Stylus type
Spherical
Stylus tip radius
R 18 μm
Tracking force range
3,0-5,0 g (30-50 mN)
Tracking force recommended
4,0 g (40 mN)
Tracking angle
20°
Internal impedance, DC resistance
750 Ohm
Internal inductance
450 mH
Recommended load resistance
47 kOhm
Recommended load capacitance
200-600 pF
Cartridge weight
18,5 g
Replacement stylus unit
Scratch
O221674 Ortofon Concorde Scratch Twin Set € 234,00
20 gevonden, waarvan 20 getoond.
(Alle prijzen zijn incl. 19% BTW.)