Elementen & Naalden

 
95 gevonden, waarvan 21 getoond.
«« | « | 01 | 02 | 03 | 04 | 05 | » | »»
Art. Omschrijving prijs voorraad
aantal
Ortofon Concorde Pro S Twin Set
Ortofon














The Pro-S retains the overall sonic properties of the Pro Silver, but provides a wider stylus for low wear as well as durability under demanding conditions.  No matter what the application, the Pro-S provides remarkable versatility for virtually any setting.


Output voltage at 1000Hz, 5cm/sec.
5 mV
Channel balance at 1kHz
2 dB
Channel separation at 1kHz
20 dB
Channel separation at 15 kHz
15 dB
Frequency range at -3dB
20-20.000 Hz
Frequency response
20-18.000 Hz +/- 2 dB
Tracking ability at 315 Hz at recommmende tracking force
70 μm
Compliance, dynamic lateral
7 μm/m N
Stylus type
Spherical
Stylus tip radius
R 26 μm
Tracking force range
3,0-5,0 g (30-50 mN)
Tracking force recommended
4,0 g (40 mN)
Tracking angle
20°
Internal impedance, DC resistance
750 Ohm
Internal inductance
450 mH
Recommended load resistance
47 kOhm
Recommended load capacitance
200-600 pF
Cartridge weight
18,5 g
Replacement stylus unit
Pro S
O221672 Ortofon Concorde Pro S Twin Set € 177,00
Ortofon Pro S Stylus
Ortofon


 
O200449 Ortofon Pro S Stylus € 29,00
Stanton 505.V3 H4 - Twin
Stanton

The new 505.V3 is the best budget-priced scratching cartridge available today. The super sturdy stylus has been coupled with the most pumped-up output for the deepest bottom and in-your-face sound.

Available in the following versions:

Single
A single cartridge inside a blister pack.

Twin Pack
Two cartridges inside a blister pack.

Twin Pack H4S
Two cartridges conveniently pre-mounted on Stanton H4S silver headshells.

Perfect for:

  • Hip-hop / Scratch DJs
  • Consumers
  • Record shops
  • Beginner DJs
  • Affordable cartridge ideal for scratching
  • 2-coil spherical design with high output and bass response
  • New industrial design

THE NEW STANTON 505 V3 STYLUS ALSO FITS THE OLD STANTON 505SK II CARTRIDGE. THE OLD D-5100 SK II DP STYLI ARE NOW REPLACED BY THE NEW N-505 STYLUS.

Description Measurement
Frequency Response 20 to 17 kHz
Output @ 1kHz: 6.0mV
Channel Separation @ 1 kHz: 27dB
Channel Balance @ 1 kHz: within 2 dB
Tracking Force: 2 to 5 grams
Stylus Tip: Spherical .7 mil Super High Polish
DC Resistance: 535 ohms
Inductance: 400 mH
Cartridge Weight: 5.5 grams
Tracking Ability: 80µ @ 3 grams
Recommended Load: 47k ohms and 275 pF
Replacement Stylus: N 505
Stanton 505.V3 H4 - Twin € 99,00
Ortofon Dj S Stylus
Ortofon
 
 
O200475 Ortofon Dj S Stylus € 42,00
Stanton DS3 Stylus
Stanton
 

Spherical stylus for Discmaster.V3


Stanton DS3 Stylus € 17,00
Stanton 500.V3 Twin
Stanton

The 500.V3 is an updated version of the classic Stanton 500AL. With more years spent on the decks than any other cartridge in the world, the 500 series has earned a reputation as a standard. The 500.V3 represents a perfect balance between economy, reliability, ruggedness and optimum performance.

Available in the following versions:

Single
A single cartridge inside a blister pack.

Twin Pack
Two cartridges inside a blister pack.

Perfect for:

  • Hip-Hop / Scratch and Club DJs
  • Consumers
  • Record shops
  • Beginner DJs
  • Industry-standard spherical cartridge ideal for almost any application
  • Rugged and reliable at a great price
  • New industrial design
  • Improved skip resistance

THE NEW STANTON 500 V3 STYLUS ALSO FITS THE OLD STANTON 505SK II CARTRIDGE. THE OLD D-D-5100 AL II DP STYLI ARE NOW REPLACED BY THE NEW N-500 STYLUS.

Description Measurement
Frequency Response 20 to 17 kHz
Output @ 1kHz: 4.6mV
Channel Separation @ 1 kHz: 28dB
Channel Balance @ 1 kHz: within 2 dB
Tracking Force: 2 to 5 grams
Stylus Tip: Spherical .7 mil Special High Polish
DC Resistance: 535 ohms
Inductance: 400 mH
Cartridge Weight: 5.5 grams
Tracking Ability: 80µ @ 3 grams
Recommended Load: 47k ohms and 275 pF
Replacement Stylus: N 500
Stanton 500.V3 Twin € 69,00
Ortofon Scratch Stylus
Ortofon
 
 
O200497 Ortofon Scratch Stylus € 42,00
Stanton Trackmaster.V3
Stanton












With very high output and little cue burn, the Trackmaster.V3 is perfect for any club / scratch situation. The Trackmaster.V3 integrated design eliminates the need for mounting the cartridge on a headshell.

Available in the following versions:

Single
A single cartridge inside a plastic carry case. The Import version includes 1 spare stylus.

MP4
The MP4 package includes 2 matched cartridges, mounted on tone-arm like devices, inside a small and practical road-worthy clear "flight-case".

Perfect for:

  • Hip-hop / Scratch DJs
  • Club DJs
  • High-output cartridge perfect for club / scratch applications
  • 4-coil pickup design increases stereo imaging
  • Spherical stylus good for low cue burn
  • New industrial design


Description Measurement
Frequency Response 20 to 20 kHz
Output @ 1kHz: 7.0mV
Channel Separation @ 1 kHz: 30dB
Channel Balance @ 1 kHz: within 2dB
Tracking Force: 2 to 5 grams
Stylus Tip: .7 mil Spherical
Super High Polish
DC Resistance: 830 ohms nom.
Inductance: 810 mH nom.
Cartridge Weight: 18 g
Tracking Ability: 90µ @ 3 grams
Recommended Load: 47k ohms and 275 pF
Replacement Stylus: T3

 
Stanton Trackmaster.V3 € 99,00
Ortofon Concorde Pro Twin Set
Ortofon














The Pro Series of cartridges provides a great balance of sound quality with tracking ability, for virtually any style of music. With flat, transparent sound across the spectrum and excellent handling ability, the Pro Series represents one of the longest running values in DJ cartridges.

Output voltage at 1000Hz, 5cm/sec.
5 mV
Channel balance at 1kHz
1,5 dB
Channel separation at 1kHz
20 dB
Channel separation at 15 kHz
15 dB
Frequency range at -3dB
20-20.000 Hz
Frequency response
20-20.000 Hz 3dB/-2dB
Tracking ability at 315 Hz at recommmende tracking force
70 μm
Compliance, dynamic lateral
7 μm/m N
Stylus type
Spherical
Stylus tip radius
R 18 μm
Tracking force range
3,0-5,0 g (30-50 mN)
Tracking force recommended
4,0 g (40 mN)
Tracking angle
20°
Internal impedance, DC resistance
750 Ohm
Internal inductance
450 mH
Recommended load resistance
47 kOhm
Recommended load capacitance
200-600 pF
Cartridge weight
18,5 g
Replacement stylus unit
Pro
O221671 Ortofon Concorde Pro Twin Set € 193,00
Ortofon Gold Stylus
Ortofon
 
 
O221675 Ortofon Gold Stylus € 69,00
Stanton Skratchmaster.V3
Stanton












The Skratchmaster.V3 is Stanton's first headshell mountable version of the master series body. This provides the great stereo imaging of the master series cartridges and the ability to re-align the cartridge on the headshell for improved tracking response.

Available in the following versions:

Single
A single cartridge inside a plastic carry case. The Import version includes 1 spare stylus.

MP4
The MP4 package includes 2 matched cartridges, mounted on tone-arm like devices, inside a small and practical road-worthy clear "flight-case". The "import" MP4 version also includes 2 spare styli.

Perfect for:

  • Hip-hop / Scratch DJs
  • Club DJs
  • Consumers
  • Record shops
  • Beginner DJ
  • Only headshell mount version of the master series
  • Ideal cartridge in master series for scratching
  • New industrial design
 
Description Measurement
Frequency Response 20 to 18 kHz
Output @ 1kHz: 6.5mV
Channel Separation @ 1 kHz: 28dB
Channel Balance @ 1 kHz: 1.5 dB
Tracking Force: 2 to 5 grams
Stylus Tip: 0.7 mil Spherical
DC Resistance: 830 ohms nom.
Inductance: 810 mH nom.
Cartridge Weight: 6.3 g
Recommended Load: 47k ohms and 275 pF
Replacement Stylus: T3
Stanton Skratchmaster.V3 € 79,00
Ortofon Q Bert Stylus
Ortofon
 
 
O219289 Ortofon Q Bert Stylus € 46,00
Stanton Discmaster.V3
Stanton












Ideal for daily playback, the Discmaster.V3 is a great all around cartridge for any application, and best of all, it won't leave a hole in your pocket. The Discmaster.V3 integrated headshell design eliminates the need for mounting the cartridge on a headshell.

Available in the following version:

Single
A single cartridge inside a plastic carry case. The Import version includes 1 spare stylus.

Perfect for:

  • Club DJs
  • Consumers
  • Record shops
  • Beginner DJs
  • Most affordable integrated headshell cartridge
  • High output and bass with minimal cue burn
  • New industrial design


Description
Measurement
Frequency Response
20 to 17 kHz
Output @ 1kHz:
5.5mV
Channel Separation @ 1 kHz:
>28dB
Channel Balance @ 1 kHz:
within 2 dB
Tracking Force:
2 to 5 grams
Stylus Tip:
Spherical .7 mil Special High Polish
DC Resistance:
830 ohms nom.
Inductance:
910 mH. Nom.
Cartridge Weight:
18 grams
Tracking Ability:
90µ @ 3 grams
Recommended Load:
47k ohms and 275 pF
Replacement Stylus:
DS 3
 
Stanton Discmaster.V3 € 79,00
Ortofon Elektro Stylus
Ortofon
 
 
O218438 Ortofon Elektro Stylus € 42,00
Stanton 680.V3
Stanton












The legendary 680.V3 cartridge is regarded as one of the best cartridges on the planet for mixing, club use, and scratching. The wide-band frequency response will give you high energy record playback and that extra punch you need to quake the dance floor whether playing dance or hip-hop. The 680.V3`s suspension is designed to be very stable for those less then perfect club setups. The suspension is so robust that the 680.V3 functions just as good as a scratch needle as it does as a club needle. 
  • Best cartridge for scratching
  • Extremely good low end response for club environments
  • Very forgiving suspension design
  • New industrial design

MP4

The MP4 package includes 2 matched cartridges, mounted on tone-arm like devices, inside a small and practical road-worthy clear `flight-case`.

Perfect for:

  • Hip-hop / Scratch DJs
  • Club DJs

Specs

  • Stylus Type: Spherical .7 mil Super High Polish
  • Tracking Force: 2 to 5 grams
  • Frequency Response: 20Hz to 18kHz
  • Nominal Output: 7.0mV
  • Channel Balance: within 2dB
  • Channel Separation: 30dB
  • DC Resistance: 1300 ohms nom.
  • Tracking Ability: 80µ @ 3 grams
  • Recommended Load: 47k ohms and 275 pF
  • Inductance: 930 mh nom.
  • Cartridge Weight: 6.3 grams
  • Replacement Stylus: N 680
 
Stanton 680.V3 € 79,00
Ortofon Digitrack Stylus
Ortofon
 
 
O219956 Ortofon Digitrack Stylus € 46,00
Stanton 680E.V3
Stanton












The 680.V3 is the latest generation of Stanton's popular 4 coil standard mount stereo cartridge line for club DJs. It boasters the renown Stanton ruggedness balanced with total musical responsiveness. The elliptical stylus is guaranteed to extract the subtle details in your vinyl, while the 4-coil moving iron pickup translates it into clean and accurate output.
Available in the following version:
Single
A single cartridge inside a plastic carry case.
Perfect for:
  • Club DJs
  • Producers / Remixers
  • Record Archives
  • Best moving iron cartridge for dance music
  • 4-coil moving iron design provides clear sound and stereo imaging
  • New industrial design

THE NEW STANTON 680 V3 STYLUS ALSO FITS THE DISCONTINUED STANTON 680 EL-II CARTRIDGE.

THE OLD D-6800 EL II AND D-6800 EL II DP STYLI ARE NOW REPLACED BY THE NEW N-680 E STYLUS.

Description Measurement
Frequency Response 20 to 18 kHz
Output @ 1kHz: 3.9mV
Channel Separation @ 1 kHz: 30dB
Channel Balance @ 1 kHz: within 2 dB
Tracking Force: 2 to 5 grams
Stylus Tip: Elliptical .3 x .7 mil Special High Polish
DC Resistance: 1300 ohms
Inductance: 930 m
Cartridge Weight: 6.3 grams
Tracking Ability: 90µ @ 3 grams
Recommended Load: 47k ohms and 275 pF
Replacement Stylus: N 680 E
Stanton 680E.V3 € 79,00
Ortofon Concorde Arkiv Twin Set
Ortofon
 

  • Output voltage at 1000 Hz, 5cm/sec. 6 mV
  • Channel balance at 1 kHz 2 dB
  • Channel separation at 1 kHz 23 dB
  • Channel separation at 15 kHz 15 dB
  • Frequency range at - 3dB 20-22.000 Hz
  • Frequency response 20-20.000 Hz ± 2 dB
  • Tracking ability at 315Hz at recommended tracking force 80 µm
  • Compliance, dynamic, lateral 9 µm/mN
  • Stylus type Special elliptical
  • Stylus tip radius r/R 13/25 µm
  • Tracking force range 2,0-4,0 g (20-40 mN)
  • Tracking force, recommended 3,0 g (30 mN)
  • Tracking angle 20°
  • Internal impedance, DC resistance 750 Ohm
  • Internal inductance 450 mH
  • Recommended load resistance 47 kOhm
  • Recommended load capacitance 200-600 pF
  • Cartridge colour, White/White
  • Cartridge weight 18,5 g
  • Replacement stylus unit Arkiv

O221666 Ortofon Concorde Arkiv Twin Set € 214,00
Ortofon Arkiv Stylus
Ortofon
 
 
O220896 Ortofon Arkiv Stylus € 46,00
Stanton 520.V3
Stanton












Created expressly for the turntablist, featuring tight suspension for unmatched tracking force.
  • Single cartridge inside a blister pack
  • Best cartridge in the 500 series for scratching
  • Tight suspension performs at any tracking weight
  • New industrial design

Stanton 520.V3 Turntablist Cartridge - Single Pack
Designed with the most demanding cueing in mind, the 520.V3 Turntablist Cartridge from Stanton offers the tightest suspension in the 500 family of tonearm cartridges. The result: this cartridge can take the most demanding turntable loads and deliver on-point tracking during backspinning and scratching.

 
  • Frequency Response: 20 to 17 kHz
  • Output @ 1kHz: 6.0mV
  • Channel Separation @ 1 kHz: 27dB
  • Channel Balance @ 1 kHz: within 2 dB
  • Tracking Force: 2 to 5 grams
  • Stylus Tip: Spherical .7 mil Special High Polish
  • DC Resistance: 535 ohms
  • Inductance: 400 mH
  • Cartridge Weight: 5.5 grams
  • Tracking Ability: 80æ @ 3 grams
  • Recommended Load: 47k ohms and 275 pF
  • Replacement Stylus: N 520
Stanton 520.V3 € 45,00
Ortofon Nightclub MK II Stylus
Ortofon
 
 
O220893 Ortofon Nightclub MK II Stylus € 65,00
95 gevonden, waarvan 21 getoond.
«« | « | 01 | 02 | 03 | 04 | 05 | » | »»
(Alle prijzen zijn incl. 19% BTW.)